More infos
This winch option includes the different installation services necessary for its assembly. Description : 20 m/m thick support plate made of E 36 metal, welded onto the main beam of the arm, special high resistance fastenings, Omnidirectional crane head with cable roller guide and winch boom head, pulley wheel diameter 308 m/m with bronze bearing, pulley block eye. Cable guide plate across the beam. Securing spring on the rear part of the arm. Assembly of the pneumatic supply to operate the disengaging mechanism by taking over the air supply of the power take-off mechanism, pressure limiter (limits pressure to 7.5 bars), 2 solenoid valves for the engaging and disengaging functions. On-off switch on the instrument panel. Additional control function via proportional radio control. Total weight including the RXP 850 side winder 3100 kg High performance planetary gear winch, bolted onto the arm of the equipment Inner layer traction capacity : 13.5 Tons Outer layer traction capacity : 7.5Tons Operating speeds : Electro-hydraulic flow divider : 2 Inner layer, low speed : 8 m/min Outer layer, low speed : 13 m/min Inner layer, high speed : 16 m/min Outer layer, high speed : 26 m/min Drum disengaging mechanism : Pneumatic Special cable drum barrel : Grooved No-tangle cable roller guide above and below the cable drum, equipped with 4 springs which operate simultaneously :2 Galvanized steel cable (crossed left) : 8x26 steel core One end with thimble eye hook and sleeve (WLT 8T, breaking 32T) One tapered and soldered end Cable diameter : 19 mm Cable length : 50 m Painted end-of-cable signal : Red minimum breaking load : 32 000 kg
