CENTURY 9055
FOR CHASSIS 26 T MINIMUM GVW (6x4 or 8x4)
5300mm minimum wheel base.
All vehicles should have appropriated PTO already
installed (80 m.kg, ZF mounting 4 pts), subframe and
superstructure with foldable hyd. extension low rider underlift and hyd. power tilt up down
adjustment. Hyd. top recovery boom 2 stages extension.
Rear extra large stifflegs V-shaped.
Oil tank with spin-on filter. Electro-hydraulic valves with hand levers and radio remote control
Voltage 24V. Hyd high pressure pump
2 planetary winches 50000 lbs , 2 speeds with cable
5/8" x 200' 6x37 IWRS. Air clutch release free spooling
Air powered cable tensioner on winch drum, 1 adjustable cross bar with 2 fork holders, 6 pairs of various forks
BOOM structural rating
Retracted 30° 100.000 lbs
Extended 30° 18.000 lbs
Maxi extension 216"
Maxi angle 39°
Maxi hook height 299"
UNDERLIFT
Underlift tilt up/down +10°/-7°
Capacity fully extended to CL of forks 18.000 lbs
Capacity fully retracted to CL of forks 55.000 lbs
Capacities on test bench, depending on chassis - refer to the results of the study of the chassis cab
Primer coated. In compliance with EEC rules.
******************************
PRICE LIST CAN VARY DEPENDING ON US DOLLAR RATE
******************************
5300mm minimum wheel base.
All vehicles should have appropriated PTO already
installed (80 m.kg, ZF mounting 4 pts), subframe and
superstructure with foldable hyd. extension low rider underlift and hyd. power tilt up down
adjustment. Hyd. top recovery boom 2 stages extension.
Rear extra large stifflegs V-shaped.
Oil tank with spin-on filter. Electro-hydraulic valves with hand levers and radio remote control
Voltage 24V. Hyd high pressure pump
2 planetary winches 50000 lbs , 2 speeds with cable
5/8" x 200' 6x37 IWRS. Air clutch release free spooling
Air powered cable tensioner on winch drum, 1 adjustable cross bar with 2 fork holders, 6 pairs of various forks
BOOM structural rating
Retracted 30° 100.000 lbs
Extended 30° 18.000 lbs
Maxi extension 216"
Maxi angle 39°
Maxi hook height 299"
UNDERLIFT
Underlift tilt up/down +10°/-7°
Capacity fully extended to CL of forks 18.000 lbs
Capacity fully retracted to CL of forks 55.000 lbs
Capacities on test bench, depending on chassis - refer to the results of the study of the chassis cab
Primer coated. In compliance with EEC rules.
******************************
PRICE LIST CAN VARY DEPENDING ON US DOLLAR RATE
******************************
