Weight of the arm : 1 280 kg (Tools complete)
Hydraulic length of extension : 2 040 mm
LIFTING CAPACITY :
- Retracted with the forks : 8 000 kg
- Extended with the forks : 5 000 kg
- Retracted in the grid : 6 000 kg
- Extended in the grid : 4 500 kg
Its positioning and precise motion, along with the lifting arm's capacity to extend up to 2 040 mm make it the most high-performance wheel lift on the market. It allows vehicles with large overhang to be towed without damaging them (rear of platform/centre of wheel lift forks : +/- 2 700 mm).
The extendable lifting arm slides on Nylatron slide pads with adjustment of the clearance of the extension tube, enabling easy handling even with extremely heavy loads.
All subassemblies are full hot bath galvanized
The jack rods are protected by a sliding metal shock-resistant housing.
The subassemblies of the crossbar and lift forks have the following advantages :
- Increased resistance.
- Compactness (height 155 mm).
- Automatic unlocking of the crossbar's rotation system when the forks are tilted.
- Tapered roller bearings allow for perfect rotation.
- Wheel lift forks and bars to hold wheels in place are also forged and are specially designed so as not to damage wheel rims and tyres.
All the jacks are equipped with balancing valves, which enable better control of the load, and isolation of the jack in the event of tube breakage.
Our crossbars and lift forks are considered to be under run protection bars, and as such are approved according to European directive 2000/8.
